ABB-22 Cycle Interruption

Wire brush is bent and installed properly and ok.

RC: installed brush is set a bit long and it hits bottom of the blind hole.

Brican 2 Washer Coveyor Jammed

Removed parts form under conveyor chains.

Assy 2.4-Stn #2 Marposs No Cycle

Found out one small screw is bent and stopper is bent and Marposs is frozen.
After fixing mechanical things and reboot Marposs system. Since it is running but need more observation.

EMAC Z-axis Servo Drive Replacement

Siemens Simodrive for Z-axis/A-axis was replaced without loosing home position. No need to set home.
Sinumeric 814 (?)
A-axis : loading conveyor

C-axis : spindle

Main Menu >> select a sub menu
Or directly go to Machine menu to see reference point

You can use mouse.
Machine Data : machine parameters
MDA : MDI

Studer Clamping Unit Air Valve

Started to rebuild them but special tools are required. Pending.

Gear Checker

Aligned pick and place fixture and running.

CHI-10 Rotary Table Indexing Not Working

CHIRON Miller
Found X23.4 X23.5 (fixture 1 cw/ccw confirming) not working.
Fixed broken +24 VDC common line and replaced micro switches. Running.
M111 : M112 for table indexing
Need Chiron key to enable mdi operation.